Mesh Analysis 1, 2, & 3

Mesh Analysis 1

Since the same circuits were utilized from the previous nodal labs, we used the same readings and just worked out the prelab for each one.  For Mesh 1, there was a 1.13% difference for V1, and 1.31% for V2. This is minimal and even closed then what was achieved with the nodal lab.

Mesh Analysis 2

The voltage for V1 should of been 5 Volts as that resistor was in parallel with the 5V source.  We worked out 4.998V in our analysis.

Mesh Analysis 3

For this lab, we achieved a percent difference of 0.73% for V1. Using ohm's law, the calculated i1 using the measured V1 is -0.274 micro amps.  This gives a percent diff of 3.72%.